DIY Woven Burlap Christmas Stocking Tutorial

Play Game

Sew the Stocking

Layer the stocking pieces, white cotton, two woven burlap with right sides together, and then the other white cotton layer.

Sew around the edges, leaving the top open.

Fabric stocking shape with a sewn lining, showing stitched edges and seams laid flat on a wooden work surface during a DIY stocking project.

Trim the edges and cut small slits along the toe’s curve to make turning it right side out easier.

Before turning it right side out, make sure you caught all the burlap edges when sewing around the edge.

Then, turn it right side out.

Measure the circumference of the stocking’s top, decide how tall you want the cuff, and cut a piece of white fabric to match.

I gave myself enough fabric to fold under the raw edge of the cuff, plus a little extra for the seam allowance.

Fold the cuff in half lengthwise and sew up the short side to make a tube.

Fabric square for a stocking cuff with labeled folded edge and sewn edge, shown flat on a wooden surface as part of a step-by-step sewing tutorial.

Cut a length of twine about 3.5 inches long.

Push the cuff inside the stocking.

Fold the twine in half and put it between the cuff and the stocking, creating a loop to hang it from.

Hand holding the cuff of a burlap stocking, showing twine ends tucked inside the opening during the finishing step of a DIY woven burlap stocking.


Leave a Reply

Your email address will not be published. Required fields are marked *

Game Categories:  entretien du jardin